The Best Way To Clean Wood Wall Paneling: Step By Step Instructions

The Best Way To Clean Wood Wall Paneling: Step By Step Instructions

Consistent cleaning is the best way to keep wood wall paneling looking its best. It can also prevent molds and mildew from forming on the panels. Stains should be addressed as soon as they are noticed. If left untreated, they can become permanent and harder to remove.

Using this guide, you'll learn how to clean your wall panels for a long time to come.

Dust By Using a Hand-Held Duster

The best way to keep wood wall paneling in good condition is to dust it on a regular schedule. This helps reduce the amount of dirt that builds up, minimizing the need for intense cleaning sessions. It also allows the wood to retain its beauty and luster for longer.

To dust your walls, choose a soft duster made from lint-free material. This will trap the dirt effectively without scratching or damaging the wood. For areas that are hard to reach, consider using a duster with a telescopic handle.

Next, if you decide to wash your walls, be sure to dry them immediately afterward. Wood is protected from moisture seeping into it and causing damage.

If you use a commercial wood cleaner, be sure to read the instructions and warnings carefully. It’s also a good idea to perform a test spot before applying the cleaner to your wall panels.

Prepare a Cleaning Solution

While regular dusting is crucial for decorative wood paneling, there are times when a deeper cleaning is needed. Fortunately, there are many homemade and commercial cleaners that work well on this type of surface. Always read the label and test a small area of the surface to ensure that it will not react negatively with the finish.

Oil soap is also a good choice for wood paneling, as it replenishes oils and creates a fresh sheen. However, it is important to wipe off the solution quickly after applying it. Leaving it on for too long can cause a whitish haze and damage the finish.

For crayon or marker stains, a little bit of mayonnaise or baking soda can help lift them. Gently blot the stain (avoid rubbing, as this can spread or push the stain into the wall) until it lifts. You can then rinse the area with water to remove any remaining residue.

Wipe the Wall

A soft cloth soaked with a mild solvent is often effective at cleaning wood paneling. However, it is important to be careful not to use too much solvent, as this can cause damage.

Additionally, it is essential to wipe the wall paneling thoroughly with a dry cloth after using a solvent, as this will prevent moisture from penetrating the surface and causing haze or discoloration.

A sponge soaked in soapy water is effective for removing stubborn dirt or scuff marks. It is also important to rinse the sponge frequently to avoid spreading dirt from one area of the wall to another.

If the paneling is particularly dirty, it may be necessary to use a specialty soot sponge, which is designed to remove soot without damaging the wall surface.

Stains on wood paneling should be addressed as soon as possible to prevent permanent damage.

If the stain is water-based, white vinegar or a non-abrasive sponge may be enough to lift the mark. If the stains are crayon or marker-based, gently rubbing can sometimes help to break down the color and lift it from the wall.

Dry the Wall Paneling

The most important factor in maintaining wood paneling is consistent cleaning. Having a schedule that includes weekly dusting keeps the panels free of dirt and other debris, reducing the frequency of intensive cleaning sessions and extending their life.

Additionally, addressing spills and stains immediately prevents them from setting in and can also make them easier to remove without resorting to harsh chemicals.

Before applying any cleaning solution to your wall paneling, always test it on a small area first. This ensures that the product won’t damage or discolor the wood.

It’s also recommended to use a natural cleaner such as olive oil or white vinegar, as they not only clean but also nourish the paneling.

If your paneling has a deep surface structure, consider using a sponge designed to lift soot and smoke marks without smearing it. Finally, dry the paneling thoroughly after cleaning to avoid moisture penetrating and causing damage.

Removing Cobwebs and Other Debris

Wood paneled walls are a beautiful addition to any home and can provide an air of elegance and warmth to the living space. However, like any wall, they must be properly cleaned to maintain their beauty and charm.

Regular cleaning prevents dust build-up and stains. It also helps keep indoor humidity levels under control, which can cause wood to warp or crack over time.

Start by removing surface dirt and cobwebs using a microfiber cloth or the soft brush attachment of a vacuum cleaner. Next, formulate a cleaning solution by mixing mild soap or detergent with water.

Dip a clean microfiber fabric into the solution and wipe the walls in small sections. Make sure to apply light pressure and avoid excessive scrubbing. It is always a good idea to test your cleaning product on an unnoticeable area of your wall to ensure that it doesn’t damage or discolor the wood panels.

Final Thoughts!

Wood paneling is a stunning addition to any home decor, but it needs regular cleaning. The right cleaning method will preserve its beauty and increase its lifespan. Using a mild, non-abrasive cleaner is also important, as it can prevent damage. 

Whether you're a beginner or an experienced cleaner, Modern Slats is here to help you with the cleaning process of wood wall panels. We share expert tips and tricks to ensure that you can maintain the beauty and longevity of your paneling.

In addition, you can explore our extensive collection of luxury wall paneling to find the perfect option that will improve the ambiance of your space. Make your purchase today by visiting our online store!

Back to blog